18 Sound 18ID200 2-Ohm 18 iPal Neodymium Pro / Car Audio Subwoofer 3600 Watts

18 Sound 18ID200 2-Ohm 18 iPal Neodymium Pro / Car Audio Subwoofer 3600 Watts
18 Sound 18ID200 2-Ohm 18 iPal Neodymium Pro / Car Audio Subwoofer 3600 Watts
18 Sound 18ID200 2-Ohm 18 iPal Neodymium Pro / Car Audio Subwoofer 3600 Watts
18 Sound 18ID200 2-Ohm 18 iPal Neodymium Pro / Car Audio Subwoofer 3600 Watts
18 Sound 18ID200 2-Ohm 18 iPal Neodymium Pro / Car Audio Subwoofer 3600 Watts
18 Sound 18ID200 2-Ohm 18 iPal Neodymium Pro / Car Audio Subwoofer 3600 Watts

18 Sound 18ID200 2-Ohm 18 iPal Neodymium Pro / Car Audio Subwoofer 3600 Watts

18 Sound 18ID200 2-Ohm 18 iPal Neodymium Pro / Car Audio Subwoofer 3600 Watts. 18 Sound 18ID200 2-Ohm iPal 18 inch Neodymium Subwoofer 3600 Watts. The 18iD200 is an 18 inch neodymium ultra high performance subwoofer.

The transducer has been optimized for any subwoofer cabinet designs (even the most compact) and is recommended for being driven by a Class D or iPal (tm) amplifier able to deliver 3600 Watt program power without clipping on 2ohms loads. 18 Sound engineers have obtained the best possible results with today's available materials in terms of clean and undistorted LF reproduction at a ultra high SPL, with the lowest possible power compression figure.

The 18iD200 design features include a large displacement suspension system specifically designed for matching the composite fiber reinforced, straight ribbed cone. Thanks to the Double Silicon Spider (DSS) technology, the 18iD200 is able to control the moving mass with high linearity, showing an exceptional stability of mechanical parameter values in the long term.

Bl force factor, as well as all other electro-dynamic parameters, are linear within the working range. This, together with the exceptional high excursion behavior, ±18mm linear Xmax - makes the 18iD200 an extremely low distortion, highly dynamic transducer. The 18iD200 features a state-of-the-art 5,3 inside outside ISV copper voice coil enabling the 18iD to deliver extraordinary transient results. The 18iD200 has been developed after intense FEA and fluidodynamics simulation and testing, focusing on dissipating the heat generated by the powerful voice coil.

Special attention was given to the optimization of air flow into the gap without introducing audible noise. Class D amplifier optimized for maximum power transfer. Conforms to Powersoft iPal® standards. 93 dB SPL 1W / 1m average sensitivity.

135mm (5.3) split winding, four layer ISV copper clad aluminum wire voice coil. Double Silicon Spider (DSS) for improved excursion control. Voice coil Diameter: 135 mm (5.13 in). Winding Depth: 45.0 mm (1.77 in). Magnetic Gap Depth: 18.0 mm (0.71 in).

Woofer Cone Treatment: Reinforced, Water Repellent, Treated Paper. Recommended Enclosure: 120.0 dm3 (4.24 FT3). Vas: 136.0 dm3 (4.8 FT3). SD: 1225.0 cm2 (189.88 in2). Overall Diameter: 462 mm (18.19 in).

Bolt Circle Diameter: 440 mm (17.32 in). Baffle Cutout Diameter: 417.9 mm (16.42 in). Depth: 238 mm (9.37 in). Flange and Gasket Thickness: 24 mm (0.94 in). Net Weight: 18.0 kg (39.68 lb).

2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance. VIP Pro Audio & DJ Equipment has been THE destination for DJ entertainment and lighting industry professionals for over 25 years, combining knowledge and experience with our highly specialized group of professionals to bring our loyal customer base the right, low-priced solution for every situation. From PA systems, turntables, and rack gear to cables, stands and subwoofers, VIP Pro Audio has all facets of the market covered! Sound and lighting needs, we at VIP Pro Audio are never satisfied with the norm. From DJs and producers to rental contractors and lighting designers, we strive to provide our clients with innovative design ideas and the highest quality components at a low, competitive price. The United States, Canada, Worldwide. And receive return instructions if you receive a defective item. The item must be in the original packaging with all the accessories included. We reserve the right to have the unit exchanged or repaired (up to manufacture). No physical damage goods are warranted. VIP Is The Place To Be..

The Largest Selection Of Pro Audio, DJ & Lighting Equipment Unde One Roof. A Tradition Of Excellence Since 1988. Celebrating 30 Years Of Commitment To Quality & Service.

Proud To Be Most Awarded & Top Rated Dealer. 2x 18 Sound 12MB1000 12 High Output Mid-Bass Ferrite Driver 600W 8-Ohm Speaker. 4x 18 Sound 12MB1000 12 High Output Mid-Bass Ferrite Driver 600W 8-Ohm Speaker. Eighteen Sound 10NMB420 High Output MB Neodymium Transducer. 18 Sound 12MB1000 12 High Output Mid-Bass Ferrite Driver 600 Watt 8-Ohm Speaker.

This listing is currently undergoing maintenance, we apologise for any inconvenience caused.


18 Sound 18ID200 2-Ohm 18 iPal Neodymium Pro / Car Audio Subwoofer 3600 Watts